Skip to Content

Slim Down for Summer with That's Fit
AOL Tech

Posts with tag diy

iPhone anti-interference shield puts an end to buzzing speakers


As anyone with an iPhone and some unshielded speakers is likely well aware, the two don't exactly get along all that well together when they're in close proximity, with the fight for your desk's air space often resulting in an annoying buzzing sound. Now, one enterprising individual has thankfully come up with a solution in the form of the iPhone anti-interference shield, which consists of nothing more than a carefully cut Red Bull can and some always-handy double stick tape. The shield's creator does warn that there could possibly be some hindrance to your reception, however, although that apparently hasn't been noticeable so far. Of course, then shield would no doubt be just as effective with another 2G GSM phone, and you can probably find a suitable substitute for the Red Bull can if its not to your taste either.

NeuScreen multi-touch screen engine shown on Nokia N95


Call us loony, but it sure seems like Nokia's heralded N95 ends up in the middle of quite a few DIY endeavors. Sure enough, said mobile is at the heart of Sittiphol Phanvilai's latest project: NeuScreen. Put as simply as possible, the project creates a multi-touch engine for the N95, and in the demonstration waiting after the jump, a simple pen light is used to control objects on a TV screen that is connected to the aforementioned handset. Confused? Give the video a look, that always clears things right up.

[Thanks, Moses]

Prototype iControlPad proves itself on video


Hah, did you really have the nerve to doubt CraigIX? The iPhone gamepad add-on that we heard about just last week is already inching closer to reality, and there's a video to prove it. In the somewhat unexciting clip posted up after the jump, you'll see a PCB mockup of the device doing its thang, though it's quite inelegant in its current form. If you just needed one more something to boost your interest / confidence that this critter was real, you know where to head.

[Via zodttd]

iPhone gets video recording capabilities


Thanks to another set of ambitious iPhone hackers, we've officially got video on Apple's wonder-device (that somehow omitted video to begin with). It's not much right now, but if you want, you can see your phone recording five succulent seconds of real-deal video at around 15 FPS. The developers say this is just a proof of concept, and they've been able to get up to 45 FPS on the device -- so hopefully we can expect a more robust version soon (like, say, one that lets you save the recording). Check the video after the break to see the gorgeous work in action.

Cameraphone remotely activates cameraphone in DIY venture


We've seen some fairly intuitive home security creations in our day, but this little wonder ranks pretty high up there. Utilizing a couple of cameraphones, a microcontroller, solenoid relays, a photoresistor, wires galore, a soldering iron and a robust picture messaging plan, this cameraphone activated cameraphone can be used to snap pictures of a pre-defined location whenever you get curious. We could even see building an entire fleet if you're really paranoid, but by the time you add all those additional lines, you may be better off just pulling the trigger on a bonafide CCTV system. Nevertheless, feel free to follow the read link and hack until your heart's content, and check out a video of this setup in action after the jump.

Compulab's EM-X270 brings DIY to smartphones


Compulab may start a trend in the do-it-yourself world with its introduction of a fully functional -- less screen -- handheld computer. Starting at $122 you get the basic module running an Intel Xscale CPU up to 520 MHz with either Linux or Windows CE and for a bit more cake can add cellular radio, WiFi, Bluetooth, GPS, camera, or VGA touchscreen to your handset. Of course, you'll need to design yourself a nice housing as they don't seem to carry any, but hey, that's half of the DIY fun right there. Good luck with those projects, and if you make something cool send us your pics.

[Via Redferret]

iPhone replacement LCD available, proceed with caution

If you've been unfortunate enough to have broken your iPhone screen and not had it replaced, we have a DIY solution that might (or might not) work for you. Apple has released its OEM LCD screen and digitizer that's available for sale through third party vendors for a cool $150. Fortunately, a handy video is on deck for the daring installer; it details the seven layers of parts needing to be removed for the lengthy replacement to be completed. If anyone is brave enough to try this, drop us a comment and tell us about your repair experience.

[Thanks, Robby]

iPhone's first sketchy battery replacement kit appears


When the time came and your battery died, you were probably thinking you'd have to send your iPhone off to Apple as part of their expensive and complicated battery replacement program -- but now you've got a sketchy DIY option instead. Once again, a mysterious Chinese company has stepped in and "created" a "solution" to your problem with its iPhone battery replacement kit. For just $20, which is cheap enough to elicit genuine concern, you get a 1400mAh, 3.7V iPhone battery, some type of screwdriver-like tool, a strange plastic shiv, and an instruction manual (presumably in English, but you never know). All you have to do is crack open your $600 phone, de-solder your old battery and solder in the new one... and probably some other, more complicated stuff too. At this price, it seems unlikely that this battery won't explode, so buy at your own risk, and definitely try at your own risk.

[Via I4U, thanks Luigi]

Custom iPhone ringtone hacking instructions prepped for noobs

If you can't wait for the eventual Apple update, then by all means have at it weekend hackers: custom iPhone ringtones can now be yours. Disparate hacks have been cobbled together into a step-by-step guide over at the appropriately named hacktheiphone site. The instructions make use of both the iPhoneInterface and jailbreak hacks which opened up full access to the iPhone's UI and filesystem. Unfortunately, the former only works on the Intel-based Macs at the moment. For those of you a bit wary of screwing the $600 pooch somewhere along the 23 steps, take heed: "everyone [they] know has been able to restore their iPhone fully by using iTunes." So go ahead, we double-dog dare ya. Just report back in the comments how it went, mkay?

[Thanks, HaJo and Richard]

Nokia N95 one-ups Apple's iPhone via unrefined display 'hack'


There's no denying that we were fairly taken aback by the beauty of the iPhone's screen, but leave it to a clever (and likely bitter) N95 owner to trump Apple's best shot with his very Nokia. While not nearly as ingenious as converting the device into a mapmaker, this crude demonstration explains how to increase the screen real estate linked to the N95 if you're willing to sacrifice your left (or right) arm. Granted, the "hack" did begin with a broken N95, so strapping a portable TV onto one's forearm and utilizing the device's video output was about the only real solution within arm's reach (ahem). Like it or not, it's laced in utility, and you can catch a video of the action after the jump.

[Thanks, Eirikso]

Nokia N95 + RC plane = unlimited DIY aerial photography


If you've found yourself tempted by other interesting DIY aerial photography rigs, but spent all your dough on the Nokia N95 instead, you may still be able to make a lifelong (or momentary) dream come true. A pioneering lad over at the N95 Blog has suggested that nearly unlimited high-resolution aerial photography can be yours if you're willing to strap your precious handset to an RC plane and get savvy with Pict'Earth software. The application allows users to create a theoretical Google Earth of their own if the existing imagery isn't up to snuff with their personal standards. Still, we'd have to mull this one over mighty hard before attaching such a valuable communicator to a potential death bed, but feel free to let us know how things go if you can muster the courage.

[Via AllAboutSymbian]

Versatile Palm Treo cradle crafted from LEGOs

While we've seen various forms of Treo docks come and go, there's just something magical about those those colorful, timeless blocks, and although we've caught a LEGO-lovin' DS fortress acting the part before, this time it's a Palm getting the homegrown docking station. Envisioned after simply not wanting to shell out the $30 to $50 required to purchase a ho hum dock that didn't exactly fit every need, the LEGO Palm cradle is a true sight to behold, and can at least handle both the 650 and 680 with ease. Although it doesn't sport features that are too far out of the ordinary -- besides the handy earpiece hook and "solar powered WiFi tower," of course -- at least the onboard watchman walks softly and carries a big stick Sony Clie stlyus. Best of all, the project owner took a few snapshots along the way to give us a bit of insight in replicating his masterpiece, so if you've got an estimated 45 minutes and a whole stash of unused blocks, be sure to hit the read link for your next DIY endeavor.

TomTom Car Connect to spruce up handsfree calling?

Sure, speakerphone setups that broadcast your incoming calls through your vehicle's sound system aren't hard to find -- if you purchase a factory installed option, that is. But TomTom is looking out for you folks who've added a nav unit after the fact, and aren't exactly fond of using the pitiful excuse for an integrated speaker to listen in. While concrete details are slim, GPSReview has it that a Car Connect device should be coming down the pipeline to complement the company's GO 510 and 910 GPS devices -- as well as the motorcycle-friendly RIDER edition -- real soon. The unit hardwires into your vehicle's audio / lighting system, and transmits the turn-by-turn guidance, nav alerts, and most importantly, handsfree calls to your car's speakers. The device will even inform your TomTom GPS when it's time to switch from day to night mode as you toggle your headlights. Although there's no word on pricing (or whether this mysterious handsfree liaison will even hit the market), those fearful of a little DIY action need not apply.

NES controller cellphone and "Zack Morris" Bluetooth headset mods

While mobile companies are doing their best to make cellphones as sleek and futuristic as possible, retro junkies keep taking them apart and turning them into ironic, yet functional, pieces of art like these. The first mod, from Grooveking.com, makes an old Motorolla DynaTAC 8000X or "Zack Morris phone" into a Bluetooth headset, that'll get 8-times the juice of a normal battery. The second project, from DIYHappy.com, takes an old NES controller (which has already gotten the Bluetooth treatment in the past) and fills it with the guts of a Nokia 3200 – yes, the American Idol phone. You need a little technical know-how to make these for yourself, but after you get the hang of it, all of your gadgets might end up crammed into NES controllers. Sadly, the Nokia 3200 doesn't have Bluetooth so you won't be able to use these two devices together, but we look forward to the future when our Xbox 360 controllers and Treos are turned into seemlessly-integrated retro kitsch.

Silicon Valley Homebrew Mobile Phone Club formed

Generally we're not the type to engage in wild and baseless speculation, but we imagine that if the just-formed Silicon Valley Homebrew Mobile Phone Club produces even a fraction of the wealth-producing talent of its namesake, the area's venture capitalists would be wise to show up to a few meetings and press some flesh. This new club, an homage to the Homebrew Computer Club that included Apple founders Steve and Steve, was organized by Matthew Hamrick and Larry Cohen as a first step in turning cellphones into the configurable platforms that PCs have become. Hamrick and Cohen envision hackers and modders worldwide (but no cloners, thank you) sharing information on their disparate wireless tinkering, meeting both virtually on the 'net and face-to-face at regular gatherings, with the goal of creating more feature-filled, individually-tailored convergence devices. Our first request for the members? We want a Motorola MPX-styled handset running Vista for Tablet PC on a 1.xGHz dual core processor with 4GB of RAM, 30GB hard drive, SLI-enabled graphics (good luck with that!), eight megapixel camera, and of course, 802.11a/b/g/n, WiMax, Bluetooth 2.0, and, just for fun, both HSDPA and EV-DO Rev. B.




    Weblogs, Inc. Network

    AOL News

    Other Weblogs Inc. Network blogs you might be interested in: